RTD'S

Bayonet RTD’s

Bayonet  RTDs

Bayonet RTD’s
Element Type PT 50, PT100, PT200, PT500 and PT1000 as per DIN 43760, IEC 751, BS 1904
Range200 to 600ºC
Element formSimplex/Duplex
ConstructionRigid / Flexible
InsulationCeramic / Mineral
Sheath MaterialSS 304/304L,316/316L, etc Cable Insulations : Teflon / Fiberglass / SS Braiding etc,

Handle Type RTD’s

Transition Joint RTDs Probes

Handle Type RTD’s
Element Type PT 50, PT100, PT200, PT500 and PT1000 as per DIN 43760, IEC 751, BS 1904
Range200 to 600ºC
Element form Simplex/Duplex
ConstructionRigid / Flexible
InsulationCeramic / Mineral
Sheath MaterialSS304,SS316, Brass, PTFE Coated SS
Cable InsulationPVC/Teflon / Fiberglass / SS Braiding etc.

Skin Type RTD’s

Skin Temperature measurement RTDs

Skin Type RTD’s
Element TypePT 50, PT100, PT200, PT500 and PT1000 as per DIN 43760, IEC 751, BS 1904
Range200 to 600ºC
Element formSimplex/Duplex
Construction Rigid / Flexible /Washer /Weld Pad/ Pipe Clamp
InsulationCeramic / Mineral
Sheath MaterialSS304,SS316, Brass, PTFE Coated SS
Cable InsulationPVC/Teflon / Fiberglass / SS Braiding etc.

Head Type RTD’s

RTDs with Terminal Heads

Head Type RTD’s
Element TypePT 50, PT100, PT200, PT500 and PT1000 as per DIN 43760, IEC 751, BS 1904
Range200 to 600ºC
Element formSimplex/Duplex
ConstructionRigid / Flexible
Insulation Ceramic / Mineral
EnclosureWeather Proof / Flame Proof
Sheath MaterialSS304,SS316, Brass, PTFE Coated SS

Mineral insulated RTD’s

Mineral Insulated  RTDs

Mineral insulated RTD’s
Type PT 50, PT100, PT200, PT500 and PT1000 as per DIN 43760, IEC 751, BS 1904
Range 200 to 600ºC
Element formSimplex/Duplex
ConstructionFlexible
InsulationMineral
EnclosureWeather Proof / Flame Proof
Sheath MaterialSS316

Transition Joint Probes

Handle RTDs Probe

Transition Joint Probes
Element Type PT 50, PT100, PT200, PT500 and PT1000 as per DIN 43760, IEC 751, BS 1904
Range200 to 600ºC
Element formSimplex/Duplex
Construction Rigid / Flexible
InsulationCeramic / Mineral
Sheath MaterialSS304,SS316, Brass, PTFE Coated SS
Cable InsulationPVC/Teflon / Fiberglass / SS Braiding etc.

Winding Slot RTDs

Winding Slot RTDs

Winding Slot RTDs
Element Type PT 100(100 ohm at 0 degC)
No of elementSimplex/Duplex
Body Material Fibre Glass epoxy
Temperature ClassClass F(Temperature limit:155 DegC) or Class H(femperature limit 180 DegC)
Calibration StandardIEC 60751 Or DIN 43760
AccuracyClass A/B
Sensing current10mA maximum
Dielectric strength3 KV/50Hz for 1 minute between leads and surface of Glass epoxy body
Lead Wire2/3/4 single or multiple stranded silver plated copper wire with PTFE insulation (special Lead wire and cable upon request).Please note that the selection of suitable wire gauge is depend up on the width and thickness of the sensor.

Anemometers Automation Accelerators Calibrators Cartridge Heaters Cryogenics Custom Pressure Transducers Data Loggers Data Acquisition Dial Thermometers Fiber Optics Flexible Heaters Flow meters Glass Bulb Thermometers Grippers Heaters Humidity Measurement Integrated Circuit Sensors Immersion Heaters Infrared Thermometers Level Measurement Load Cells M12 Temperature Connectors Magnetic Flow Meters Panel Meters Pressure Gauges Pressure Transducers Rota meters RTD Remote Process Monitoring Sanitary Sensors Signal Conditioners Stepper Motors Strain Gages Strip Heaters